About Hydroflo News & Technical Information A Word from the Expert Contact Information Site Map
           




  POWER PLANT
  ANALYTICAL PRODUCTS   Back to Main Product Page
 

 
Procal is a manufacturer of Process Analyzers that are used for CEM’s (Continuous Emission Monitoring).
In most cases these devices are legislated for monitoring industries emission. Primarily they are used for
green house gases.

      APPLICATIONS  
(1) Coal fired Power Generation Typical Gases (C0,C02, N0, N02, N0x, S02)
(2) Ammonia & Ammonia Nitrate Plants (C02, N0, N02, N0x, N20, CH4)
(3) Diesel Power Generation & Shipping (Co, C02, N0,N02, N0x, S02)
(4) Petroleum Refining (C0, C02, N0, N02,N0x, S02)



 
ANALYZER CONTROL UNIT (ACU) FOR WINDOWS  

This control room software package (ACW) can be used by all Procal analysers.
Installed on a PC running Microsoft Windows NT, 98 or 95, ACW is a stand-alone
program that provides all the control and display requirements of a Procal Analyser
system.






It can be the basis of a complete CEM system. The program    can be configured to collect data from up to 8 analysers,
   each of which can accept 4-20mA inputs from other
   instruments.
Trend storage for up to 5 years
Daily, weekly and monthly report options
   

 
ANALYZER CONTROL UNIT (ACU)    

The Analyser Control Unit (ACU) is the industrial grade controller used by all the
Procal analysers.
The ACU processes data from up to four analysers to produce measured values
in the units required. The integral LCD uses text and graphics to provide a comprehensive readout.



MAIN screen displaying gas concentrations with real-time clock/calendar and status
   indications.
TEST screen displaying raw data figures, sample temperature, analyser    temperature, filter wheel speed.
TREND screen displays 48 hours’ history of each component; selectable zoom    function.
ALARM screen displays current alarm states.
User and Service MENUs for configuration and control.
     
   

 
PROCAL 5000    

Typical applications:  Very low-level SOX, NOX; Ammonia slip and Total Reduced Sulphur (TRS).
The Procal 5000 range of CEM (Continuous Emissions Monitoring) instruments is designed for in stack analysis of up to 6 gas phase stack emission components.

Measurement principle: Full UV spectrum analysis, coupled with Enveloped Folded    Beam
Fast response by direct in site measurement
Low maintenance



   

 
PULSI 200LR    

Typical applications: Monitoring NO, NO2 and SO2 Analysis from combustion process
The PULSI 200LR series of instruments is designed for in stack analysis of up to six gas phase stack emission components.

Measurement principle: Dual wavelength infra-red principle coupled with Enveloped    Folded Beam
Fast response by direct in site measurement
Low maintenance
US EPA approval
CENELEC Hazardous area approval




   
 

  For information on the complete line of products offered by Procal, please contact us or call us at 1 800.465.69285.

Copyright 2009 - Hydroflo Controls Ltd. - Webmaster